|
|
 |
Current Location ：Home >Technique |
 |
| Disposable Hanxigao |
| Power-Sun Teck series products as a result of the application of advanced electronic welding materials production processes, with the following characteristics : |
1. Without causing odour, smoke less.
2. Effectively prevent the printing and preheat the 18th.
3. In US joint standards ANSI/J-STD.
4. To ensure high reliability and excellent material.
5. Control of welding powder, and ensure good for the printing and sophisticated design.
6. Nien lasting power, not drying, effective working life for more than eight hours.
7. After returning remnants colorless transparent and limited in quantity, without corrosive showing good insulation performance.
8. Printing rolling down tin sexual performance and good for less than 0.3mm spacing Hanpan can accomplish excellent print. |
| Application |
1. SMT Industries :
Computers and peripheral equipment, mobile phone, television, film, audio, telephone.
2. Computer radiator
Tonglu: apply for welding and heat control film welding.
3. Computer Keyboard |
| Common adverse phenomena and analysis |
Tin kau : Long back. Printing too, after many components lower Frederick overflow. Patches of excessive pressure, a heart Gaoti phenomenon.
Even welding : Mainly in the IC. Templates too, cleaning overflow. IC misplaced generally not exceed 1/3. Templates cleansing in a timely fashion. Printing too much pressure for printing graphics blurred.
Air welding (330,000) : Printing uneven, thick tin side, and another tin thin. Y2K position improper caused Shoulibu are.
Small tin : Surface temperature distribution panels, and high above are low, cleaning below first touch, tin has nothing, then allow comments lower reach higher.
Remnants excessive : Mainly temperature up. Either side can lower temperature below temperature.
Lenghan : Low temperature, soldering tin that just melt out, intensive joints prone areas, or areas may warming peak temperature rise. |
| Conservation and attention to matters : |
|
Avoid contact with skin, if attached to clothing or physical, should be used to contain alcohol solvents Hanxigao erase.
Operating process does not allow eating, smoking, exercise, use soap or lukewarm water should be consumed.
Hanxigao removed from the refrigerator, should be more up to room temperature for 4 hours thaw (19 degrees -25 degrees) can use
Removed from the required volume of containers Hanxigao, once used, do not put the original containers. Should be scrapped or stored in separate containers and refrigerators (0℃ -10 degrees) until the next use.
Hanxigao process in the transport and long-term storage will be slightly from the Xie and therefore recommends the use of foot even before Hanxigao : (mixing machines for 1-3 minutes, stirring for 4 minutes Zhong artisanal)
Maintain good ventilation operations on the ground, to avoid sources close to the fire. |
|
